AI assembly templates for scale models
Print a full-size placement guide for loose model parts, with labelled post holes and a cut list that accounts for how the model sits on its base.
AI assembly templates for scale models let you transfer positions from the printed geometry to a real baseboard. Suppose a canopy stands on six brass posts. A post length measured above the board leaves out the section hidden inside its socket. Give model-assembly-sheet the socket depth and any change in seating height as well as the visible height.
You get a placement PDF, a preview and a CSV cut list. The labels and the spreadsheet share one calculation, so you can sort the rods on the bench and still read the drawing from the same side of the model.
What it does
- Mark furniture feet on a board without drawing the outline of the entire tabletop.
- Label similar posts by zone, structure and position as seen from one declared viewpoint.
- Show existing walls for alignment without letting them dictate the paper size.
- Distinguish pipes, screens and supports by colour and explain the colours on the sheet.
- Update a cut list when a printed support sits higher than the original design.
Install and use
- Use an agent with local Python, trimesh and Matplotlib. Supply the printed STL versions and any placement shifts, socket depths and seating offsets.
- Try asking, “Make a template for this courtyard, looking in from the alley. Label the inner and outer posts on both bridges.”
- Inspect the preview. Choose larger paper or divide the drawing if the outlines extend past the usable area.
- Print at actual size, measure the 50 mm check bar and align the paper to two features on the base.
FAQ
Source
Made by Zohar Tito. Original skill: model-assembly-sheet, published on GitHub under the MIT licence.
View on GitHub